Question 1

What aerospace-grade materials can you stamp?

Accepted Answer

We stamp aerospace-grade aluminum alloys (2024-T3, 6061-T6, 7075-T6), stainless steels (304, 316, 321, 17-4PH, 15-5PH), titanium alloys (Grade 2, Grade 5/Ti-6Al-4V), nickel alloys (Inconel 625, 718), and specialty alloys (Monel, Hastelloy). All aerospace materials are sourced with full material certifications and mill test reports from approved suppliers, with chemical composition and mechanical property traceability maintained throughout production.

Question 2

Do you hold AS9100 aerospace quality certification?

Accepted Answer

While our primary certifications are ISO 9001:2015 and IATF 16949:2016, we operate aerospace projects under ISO 9001 with aerospace-specific quality requirements including First Article Inspection (FAI) per AS9102, full material traceability, mandatory inspection points, and customer-approved inspection plans. We are actively working toward full AS9100D certification and can meet most aerospace quality requirements through our existing QMS framework supplemented by customer-specific quality clauses.

Question 3

What types of aerospace components do you stamp?

Accepted Answer

Our aerospace stamping portfolio includes: structural brackets and clips (fuselage, wing, landing gear), electrical grounding straps and bus bars, EMI/RFI shielding components, shims and spacers with precise thickness control, sensor and avionics mounting brackets, thermal shield components, gaskets and sealing washers, and cable harness clips. Parts range from micro-stampings under 1 gram to structural brackets exceeding 500 grams.

Question 4

How do you ensure full material traceability for aerospace parts?

Accepted Answer

Every aerospace part we produce is fully traceable from certified mill source to finished component. Our traceability system includes: unique heat/lot number assignment upon material receipt, segregation of aerospace materials in dedicated storage, lot-level tracking through every production operation, in-process traceability stamps on work orders, permanent part marking (laser etching or ink marking per customer spec) when required, and a complete traceability certificate package with every shipment linking part serial numbers to raw material mill test reports.

Question 5

What tolerances and inspection standards do you meet for aerospace stamping?

Accepted Answer

We achieve dimensional tolerances of ±0.025mm (0.001") for precision aerospace features and ±0.05mm for general dimensions. Our inspection capabilities include CMM with 0.001mm resolution, optical comparator, vision measurement, surface profilometry, and hardness testing. We perform First Article Inspection (FAI) per AS9102 requirements with full ballooned drawing reports, and can accommodate customer source inspection, third-party NDT (penetrant, magnetic particle), and special process certifications as required.

Aerospace fitomboka metaly - Flight-Critical fametahana metaly mazava tsara Components

Aerospace fitomboka Components

Aerospace Materials

kalitao sy fanarahan-dalàna

Mangataka fitenenana

Ny fahaizantsika

Loharano mifandraika amin'izany