Mwube na ngwa ngwa ngwa na-emepụta ihe na-agbanwe agbanwe maka akụkụ stampụ igwe nke jikọtara ntụkwasị obi nhazi, ịdịte ihe onwunwe, na nkwughachi akụkụ. N'adịghị ka ndị na-azụ ahịa ma ọ bụ ngwa ịchọ mma, akụkụ ndị nwere akara akara ụlọ ga-arụ ọrụ n'okpuru ibu, ikpughe gburugburu ebe obibi, ike mgbakọ na nrụgide ọrụ ugboro ugboro. A na-ejikarị koodu ụlọ, ụkpụrụ nhazi, ma ọ bụ mpempe nkọwa OEM na-eduzi ihe ndị chọrọ ime ka ọ bụghị mmasị mma.
Anyị na-arụpụta akụkụ igwe nwere stampụ maka ngwa owuwu ihe owuwu, braket arụrụ arụ, ihe nkwudo, na mgbakọ usoro ụlọ. Ike anyị na-ekpuchi ihe dị iche iche, akụkụ geometry, na mpịakọta mmepụta nke dabara na usoro ịzụrụ ihe nke mmemme OEM ewu.
Na-achọ akụkụ ihe owuwu stampụ? Zipu gị eserese, ihe nkọwapụta, na olu chọrọ ka anyị kọntaktị ibe maka nyocha nrụpụta.
Ụdị Metal akụkụ e kụrụ akara for Construction
ụdị ihe owuwu na-eji a dum nso usoro ihe owuwu ụlọ:
- Ihe nkwado na akụkụ - nkwado mmekọ, ihe nkwudo joist, njikọ rafter, njikọ riji
- Efere arịlịka na efere ntọala - ntọala kọlụm, ngwaike jidesie ike, ọwa arịlịka
- eriri na tie njikọ - njikọ osisi, shiee efere, agbatị ajọ ifufe, eriri mgbaka
- Clip angles and gussets - ihe nchara nchara, ihe nkwado, nke abụọ
- Ngwaike seismic na nke ikuku - njikọ shiee, arịlịka e gosiri na mgbakasị ahụ, oge etiti components
- Door and window hardware - hinges, iku efere, etiti reinforcements, sill brackets
- Igwe ọkụ eletrik na igwe ihe mkpuchi - panel na-akwado, conduit brackets, cable trays
- Formed perforated part - ventilashion ogwe, grating, ibu-nkesa efere
Ihe maka stampụ ihe owuwu
Mwube stampụ akụkụ ga-egbo mkpa gburugburu ebe obibi na structural chọrọ n'elu ogologo oge ọrụ. Nhọrọ ihe na-adabere na ibu ibu, gburugburu corrosion, ndakọrịta mmecha, na ebumnuche ọnụ ahịa.
| Ihe onwunwe | Key Njirimara | Ngwa ihe owuwu |
|---|---|---|
| Structural carbon steel (Q235, A36) | Ike dị elu, weldable, paintable, ọnụ ahịa dị ọnụ ala | mgbaaka mgbaka, fraktị aka mgbaka, fraktị, fraktị, fraktị, brastructs, brastructs ngwaike. |
| Galvanized ígwè (SECC, DX51D+Z) | Zinc mkpuchi maka nguzogide corrosion, weldable mgbe ebipụchara. | ngwaike mpụga, ihe njikọ elu ụlọ, ihe mkpuchi ekpughere |
| igwe anaghị agba nchara (304, 316) | Corrosion na-eguzogide ọgwụ, ike dị elu, na-adịgide adịgide na gburugburu mmiri. | Akụrụngwa dị n'ụsọ oké osimiri, ngwa dị n'akụkụ mmiri, ihe nkedo |
| Aluminium (60521) | Dị fechaa, corrosion na-eguzogide ọgwụ, na-abụghị magnetik | Akụrụngwa mgbidi ákwà mgbochi, ngwa windo, braket dị fechaa |
Maka akụrụngwa ihe owuwu chọrọ galvanizing na-ekpo ọkụ, electroplating, ma ọ bụ mkpuchi ntụ ntụ, anyị na-anabata ọgwụgwọ elu post-ịkụ akara dị ka akụkụ nke ọrụ ahụ. Hụ: ígwè ịkụ akara, igwe anaghị agba nchara ịkụ akara, na aluminum ịkụ akara.
Usoro stampụ maka akụkụ ihe owuwu.
Akụrụngwa ihe owuwu na-agụnye ihe nlere siri ike (1.2 mm ruo 6 mm), ike na-akpụ elu, yana mpịakọta mmepụta ihe na-agafeghị oke ruo elu. Ụzọ stampụ nkịtị gụnyere:
- Na-aga n'ihu ọnwụ ịkụ akara - maka ibe ngwaike pere mpe, mkpachị, njikọ, na braket nwere atụmatụ ikwugharị na oke olu. Hụ: na-aga n'ihu ọnwụ ịkụ akara
- Mpempe akwụkwọ ịkụ akara ígwè - maka akụkụ ndị buru ibu na-akpụ akpụ dị ka efere ntọala, ígwè akụkụ, na akụkụ mkpuchi. Hụ: mpempe akwụkwọ ịkụ akara
- anwụ jikọtara ịkụ akara - n'ihi na ewepụghị ọkpọ ọkpọ na oghere, oghere, na mfe ụdị emepụta n'out oge na otu ọrịa strok
- Ọrụ nhazi ígwè -ehulata, flanging, coining, and embossing agbakwunyere n'ime usoro ngwaọrụ. Lee: metal akpụ
Maka akụkụ arụrụ arụ, a na-emepụta ngwá ọrụ site na mkpochapụ kwesịrị ekwesị yana oke tonnage iji jikwaa ike mkpụrụ dị elu nke ọkwa nchara nhazi.
Atụmatụ imewe maka stampụ ihe owuwu.
Nhazi ngwaike ihe owuwu dị iche na ngwa elektrọnik ziri ezi ma ọ bụ akụkụ ụgbọ ala n'ụzọ dị iche iche:
- Nleba ọkpụrụkpụ - bughi brackets bụ a 1.5-5 mm oké, na-achọ elu pịa ikike na dị iche iche tooling ihe karịa mkpa-nleba anya nkenke ịkụ akara
- Usoro oghere na mkpochapụ bolt - ụkpụrụ oghere ọkpọkọ ga-aza ajụjụ maka nnabata ngwa ngwa na koodu njikọ nhazi.
- Ngwunye elu na mkpuchi mkpuchi - ọtụtụ ihe owuwu akụkụ na-achọ na-ekpo ọkụ-mikpu galvansing, nke pụtara n'elu pores burrs. ịkụ akara imewe
- Batch flexibility - Ihe owuwu ihe owuwu na-ejikarị mpịakọta agwakọta nke usoro ịzụrụ ọrụ na-akwalite kama ịchịkọta ihe kwa izu.
- Jiometry ibu-ụzọ - ọnọdụ nke bends, oghere, na flanges na-emetụta structural arụmọrụ; Nlebanya DFM maka akụkụ ihe owuwu gụnyere mgbagha mgbakasị isi
Industries n'akụkụ ihe owuwu nke anyị na-eje ozi
Nka na ngwa eji arụ ọrụ stampụ ọla na ụlọ ọrụ dị n'akụkụ:
- Ụlọ ọrụ ụgbọala - brackets arụrụ arụ, nkwado dị n'okpuru, akụkụ dị elu kpụrụ. Hụ: ụgbọala ịkụ akara
- Aerospace - ihe eji arụ ọrụ, nkwado panel kpụrụ. Lee: Aerospace ịkụ akara ígwè
- Ngwa ụlọ - ihe eji arụ ọrụ. Lee: stampụ ngwa ụlọ
Gịnị kpatara Source Construction Hardware si n'aka onye nrụpụta ịkụ akara
Ihe nrụpụta ngwaike dị iche na isi mmalite akụrụngwa n'ụzọ dị iche iche:
- Geometry na-adịkarị mfe - akụkụ, eriri, efere, na obere vidiyo nwere njirimara nnabata dị ntakịrị mana ha chọrọ ike ihe a pụrụ ịdabere na ya na akụkụ na-agbanwe agbanwe.
- Mpịakọta na oge mgbanwe ihe - Ịzụ ahịa na-ebute oru ngo nwere ike ịchọ mgbanwe dị iche iche n'ofe oge ma ọ bụ usoro ọrụ
- Asambodo ihe mgbe ụfọdụ achọrọ - ụfọdụ koodu owuwu chọrọ traceability ihe ma ọ bụ akwụkwọ akụrụngwa maka akụkụ arụrụ arụ
- Mgbakwunye ọgwụgwọ elu bụ ihe a na-ahụkarị - akụkụ ihe owuwu na-agakarị site na galvanizing, mkpuchi ntụ ntụ, ma ọ bụ ngafe tupu echichi
Anyị na-eleba anya n'ihe ndị a niile na ntinye akwụkwọ na nhazi nhazi stampụ metal.
FAQ: Mwube ịkụ akara ígwè
Kedu akụkụ ígwè stampụ ejiri rụọ ọrụ?
stampings na-ewu ewu na-agụnye structural brackets, strapngle brackets. njikọ nke ajọ ifufe, ngwa ngwa ọnụ ụzọ na windo, ihe mkpuchi ọkụ eletrik, na paịlị gbawara agbawa. A na-emepụta ọtụtụ n'ime ígwè carbon, galvanized steel, ma ọ bụ igwe anaghị agba nchara.
Gịnị ọkpụrụkpụ nke ígwè ị nwere ike stampụ maka ihe owuwu akụkụ?
Anyị na-etinye stampụ akụkụ site na 0.5 mm ruo 6 mm dabere na ọkwa ihe na ikike pịa. Ọtụtụ ngwa ihe owuwu ihe na-adaba na oke 1.5-4.5 mm. Akụkụ ndị dị n'elu ọkpụrụkpụ a na-ejikarị igwe ma ọ bụ na-ekpo ọkụ kpụọ kama ka a kpụrụ oyi.
Ị nwere ike ịnye galvanized ma ọ bụ ihe mkpuchi mkpuchi maka stampụ ihe owuwu?
Ee. Anyị nwere ike na-arụ ọrụ na pre-galvanized eriri igwe (SECC, DX51D + Z) dị ka akụrụngwa, ma ọ bụ na-ahazi post-stamp hot-mikpu galvanizing, ntụ ntụ uwe, ma ọ bụ zinc plating dị ka akụkụ nke ọkọnọ yinye dabere na oru ngo chọrọ.
Ị na-akwado nhazi ngwaike ihe owuwu omenala site na eserese?
Ee. Anyị na-arụpụta ngwaike ihe owuwu omenala site na eserese injinia, faịlụ CAD, ma ọ bụ nlere anụ ahụ. Akụkụ omenala niile na-aga site na nyocha DFM tupu itinye ego n'ọrụ. Hụ: omenala metal stampụ akụkụ.
Gịnị bụ ahụkarị ndu oge maka owuwu ngwa ọrụ ịkụ akara?
N'ihi na ọkọlọtọ compound ma ọ bụ na-aga n'ihu anwụ na-eji na-ewu ngwaike, tooling-mwube na-ewe 3-6 izu. Ihe nlele edemede mbụ na-eso. Oge mmepụta oge mgbe nkwado na-adabere na olu usoro na nhazi oge ugbu a.
Rịọ okwu maka Mwube ịkụ akara ígwè
Mmemme ngwaike ihe owuwu na-erite uru n'aka onye na-ebubata ihe na-aghọta akparamagwa ihe arụrụ arụ, ngbanwe nke ịzụrụ ihe, yana ahịa dị n'etiti itinye ego na ngwa akụ na ụba nke otu akụkụ n'oke oke.
Mwube Akụrụngwa Categories na Ngwa
Ihe owuwu na ihe owuwu ụlọ na-ekpuchi ọtụtụ ihe metal stampụ, nke ọ bụla nwere ihe nhazi, akụkụ, na imecha chọrọ. Ịghọta ngwa a na-enyere aka kọwapụta usoro mmepụta ihe:
- Structural brackets and connectors - L-brackets, T-brackets, joist hangers na beam connectors na-ebufe ibu n'etiti ndị otu nhazi. Akụkụ ndị a na-achọkarị 2-5 mm carbon steel ma ọ bụ igwe galvanized, nwere ụkpụrụ oghere emebere maka nha ngwa ngwa na ọkwa ibu.
- Efere arịlịka na efere ntọala - eji jikọọ structural ígwè na kọmpat ntọala. Akụkụ ndị a chọrọ ịdị larịị, oghere ọnọdụ ziri ezi, na oke zuru oke iji kesaa ibu bolt na-enweghị nrụrụ.
- Njikọ eriri na njikọ ifufe - metal straps that connect rafters, studs Forces up lateral A na-emepụta ihe ndị a site na ígwè galvanized 1-2 mm nwere ọtụtụ ntu ma ọ bụ mkpọsa oghere. Olu dị elu yana ndakọrịta akụkụ dị oke mkpa maka nnabata koodu.
- Clip angle and framing angle - eji n'ime ihe owuwu nchara maka ijikọ ogwe, ogidi, na studs. A na-etolite akụkụ ndị a site na nchara 1.5-4 mm nke nwere akụkụ mgbanaka ziri ezi na usoro oghere.
- Door and window hardware - hinges, iku, ndị na-eche nche, efere nkwado, na ọwa ihu igwe. Akụkụ ndị a chọrọ ntachi obi siri ike na imecha elu dị mma karịa ngwaike arụrụ arụ, a na-esikwa na igwe anaghị agba nchara ma ọ bụ nchara kpuchie ya.
- Ihe mkpuchi eletrik na nkwado — rịkwasịrị brackets, panel supports, na cable management clips used in electric install. Akụkụ ndị a ga-adabarịrị n'ụkpụrụ mkpuchi ọkọlọtọ ma kwado ịdị arọ nke panel, conduits na wiring.
Otu ọ bụla nwere ihe dị iche iche chọrọ maka ihe, ọkpụrụkpụ, ndidi, imecha na olu. Nlebanya DFM anyị na-enyocha ngwa a kapịrị ọnụ iji kwado atụmatụ ngwa ọrụ ziri ezi na usoro usoro.
mkpuchi mkpuchi na imecha nhọrọ maka stampụ ihe owuwu
A na-ekpughekarị ngwaike ihe owuwu maka iru mmiri, UV, ịgba ígwè okpomọkụ, na uwe igwe. Usoro mkpuchi ma ọ bụ imecha ga-adaba na gburugburu ọrụ na ndụ ọrụ a na-atụ anya nke ụlọ ahụ:
- Pre-galvanized coil (SECC, DX51D + Z) - Akụkụ ndị a kpụrụ akpụ site na eriri akpa galvanized nwere nchebe zinc site na mmalite. Nke a bụ usoro a na-ahụkarị maka ngwa ihe owuwu ime ụlọ yana ngwa mpụta ọkụ. Ihe oyi akwa zinc nwere ike ịgbawa na radis gbagọrọ agbagọ, yabụ imepụta ngwaọrụ ga-ebelata mmebi mkpuchi mgbe a na-akpụ.
- Hot-dip galvanizing (post-stamp) - maka mpụga na ngwa ọrụ dị arọ, a na-agbanye akụkụ ahụ site na nchara na-enweghị ihe na-ekpo ọkụ ma na-ekpo ọkụ na-ekpo ọkụ mgbe emechara. Nke a na-enye mkpuchi zinc nke siri ike karị, nke dabara adaba maka ikpughe n'èzí na gburugburu osimiri.
- mkpuchi ntụ ntụ - electrostatic ntụ ntụ mkpuchi na-enye ihe na-adịgide adịgide, ịchọ mma n'ọtụtụ agba. Ọkpụrụkpụ uwe ntụ ntụ na-abụkarị 60-120 µm ma na-enye ma nchebe corrosion na ọdịdị mara mma. Ihe a na-ahụkarị maka ngwa ihe owuwu ihe na ihe owuwu ụlọ.
- Zinc plating (electroplating) - na-enye akwa akwa zinc siri ike na ngwa dị n'ime ime ụlọ na-ekpo ọkụ, nke kwesịrị ekwesị na-eme ka ọ bụrụ ihe na-ekpo ọkụ. atụmatụ dị mkpa. Enwere ike ịgbakwunye ntụgharị chromate maka nguzogide corrosion ọzọ.
- Black oxide na phosphate mkpuchi - na-enye nguzogide corrosion dị nro na ọdịdị gbara ọchịchịrị. A na-ejikarị ya eme ihe maka fasteners na ngwaike dị n'ime ebe ọdịdị na-arụ ọrụ nke abụọ.
Nhọrọ mkpuchi bụ akụkụ nke DFM na ntụle okwu. Anyị na-ahazi usoro mkpuchi mkpuchi na ndị na-ebubata ihe ruru eru iji hụ na akụkụ nke emechara na-ezute ma akụkụ na imecha chọrọ.
Ajuju Ajuju
Kedu akụkụ ígwè stampụ ejiri rụọ ọrụ?
stampings na-ewu ewu na-agụnye structural brackets, strapngle brackets. njikọ nke ajọ ifufe, ngwa ngwa ọnụ ụzọ na windo, ihe mkpuchi ọkụ eletrik, na paịlị gbawara agbawa. A na-emepụta ọtụtụ n'ime ígwè carbon, galvanized steel, ma ọ bụ igwe anaghị agba nchara.
Gịnị ọkpụrụkpụ nke ígwè ị nwere ike stampụ maka ihe owuwu akụkụ?
Anyị na-etinye stampụ akụkụ site na 0.5 mm ruo 6 mm dabere na ọkwa ihe na ikike pịa. Ọtụtụ ngwa ihe owuwu ihe na-adaba na oke 1.5-4.5 mm. Akụkụ ndị dị n'elu ọkpụrụkpụ a na-ejikarị igwe ma ọ bụ na-ekpo ọkụ kpụọ kama ka a kpụrụ oyi.
Ị nwere ike ịnye galvanized ma ọ bụ ihe mkpuchi mkpuchi maka stampụ ihe owuwu?
Ee. Anyị nwere ike na-arụ ọrụ na pre-galvanized eriri igwe (SECC, DX51D + Z) dị ka akụrụngwa, ma ọ bụ na-ahazi post-stamp hot-mikpu galvanizing, ntụ ntụ uwe, ma ọ bụ zinc plating dị ka akụkụ nke ọkọnọ yinye dabere na oru ngo chọrọ.
Ị na-akwado nhazi ngwaike ihe owuwu omenala site na eserese?
Ee. Anyị na-arụpụta ngwaike ihe owuwu omenala site na eserese injinia, faịlụ CAD, ma ọ bụ nlere anụ ahụ. Akụkụ omenala niile na-aga site na nyocha DFM tupu itinye ego n'ọrụ.
Kedu ihe nnabata ị nwere ike ijide na brackets na njikọ njikọ?
Nkwenye ọnọdụ oghere na-abụkarị ± 0.1-0.3 mm. Nkwenye n'akụkụ ihu bụ ± 0.5°-2° dabere na ọkpụrụkpụ ihe na ogologo nkpu. Nkwenye ewepụghị ọnụ na-adabere na akụkụ geometry na enyemaka nrụgide ihe onwunwe. A na-enyocha akụkụ dị egwu n'oge nyocha akụkọ mbụ.
Gịnị bụ ahụkarị ndu oge maka owuwu ngwa ọrụ ịkụ akara?
Ngwá ọrụ ọnwụ na-aga n'ihu maka ngwaike ihe owuwu na-ewekarị izu 3–5. Enwere ike ịmecha ngwa ngwa otu-kụrụ ma ọ bụ nhazi n'ime izu 2-3. Oge ndu na-adabere na mgbagwoju anya ngwá ọrụ, ọnụ ọgụgụ ọdụ ụgbọ mmiri, na ọrụ injinia dị ugbu a.
Kpọtụrụ anyị ka anyị kparịta ihe achọrọ stampụ igwe owuwu - zipu eserese, nkọwapụta ihe, atụmatụ olu, yana ihe ọ bụla imecha ma ọ bụ asambodo chọrọ.