{"id":2340,"date":"2026-07-04T20:44:36","date_gmt":"2026-07-04T12:44:36","guid":{"rendered":"https:\/\/metalstampingparts.ltd\/?page_id=2340"},"modified":"2026-07-04T20:44:36","modified_gmt":"2026-07-04T12:44:36","slug":"stamped-part-containment-label-sorting-evidence-guide","status":"publish","type":"page","link":"https:\/\/metalstampingparts.ltd\/ceb\/stamped-part-containment-label-sorting-evidence-guide\/","title":{"rendered":"Stamped Bahin Containment Label and Sorting Evidence Giya"},"content":{"rendered":"

Short answer:<\/strong> Containment labels and sorting evidence matter when giporma nga mga piyesa are inspected, reworked, or temporarily released after a quality issue. The RFQ or corrective action plan should define defect criteria, sort method, accepted and rejected quantities, label wording, hold tags, photos, sample retention, inspector responsibility, report format, and when normal shipment labels can resume.<\/p>\n

After a defect is found, the buyer often needs usable stock quickly. Sorting and containment can help, but only if the accepted parts are clearly labeled and the evidence shows what was checked. Otherwise receiving may not know whether a carton is normal production, sorted stock, reworked stock, or temporary approved stock.<\/p>\n

Use this page with the containment plan template<\/a>, tagasuplay corrective action guide<\/a>, deviation and concession approval guide<\/a>, and cosmetic and functional defect boundary guide<\/a>.<\/p>\n

Containment evidence to define<\/h2>\n\n\n\n\n\n\n\n\n
Evidence<\/th>\nWhy it matters<\/th>\nRFQ or action-plan detail<\/th>\n<\/tr>\n<\/thead>\n
Defect criteria<\/td>\nSorters need the same pass\/fail rule as the buyer.<\/td>\nPhotos, limit samples, measurement limit, and escalation rule.<\/td>\n<\/tr>\n
Quantity record<\/td>\nBuyer needs to know what was checked and what remains at risk.<\/td>\nChecked, accepted, rejected, reworked, held, and shipped quantities.<\/td>\n<\/tr>\n
Label wording<\/td>\nReceiving must identify sorted or temporary approved stock.<\/td>\nSorted label, hold tag, deviation label, date, inspector, and lot ID.<\/td>\n<\/tr>\n
Exit rule<\/td>\nContainment should not last forever without approval.<\/td>\nClean-point lot, corrective action milestone, and normal-label resume rule.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Separate sorted stock from normal stock<\/h2>\n

A containment action fails if sorted cartons look the same as normal production. Labels should show what was checked, who checked it, when it was checked, which lot or carton was included, and whether the stock is accepted, held, reworked, rejected, or released under deviation.<\/p>\n

If a defect is visual, use photos or limit samples. If it is dimensional, use a gage or measurement rule. If it is functional, define the test. The label should not simply say inspected unless the inspection criteria and report are connected to the carton or lot.<\/p>\n

Keep evidence tied to the buyer decision<\/h2>\n

Containment often happens under time pressure. The buyer may approve temporary shipment while root cause is still open. In that case, the label and report should show the temporary rule, expiry date, affected quantity, and whether future lots still need sorting. Use the first-off and last-off guide<\/a> when the clean point depends on production lot release.<\/p>\n

For mixed inventory, make the receiving path obvious. Sorted stock, unsorted stock, reworked stock, and deviation-approved stock should not share the same label or pallet position without clear separation. Connect labels to the carton label and barcode guide<\/a> if receiving scans cartons into inventory.<\/p>\n

RFQ details to include<\/h2>\n