{"id":2296,"date":"2026-07-04T10:31:28","date_gmt":"2026-07-04T02:31:28","guid":{"rendered":"https:\/\/metalstampingparts.ltd\/?page_id=2296"},"modified":"2026-07-04T10:31:28","modified_gmt":"2026-07-04T02:31:28","slug":"tape-and-reel-pocket-orientation-stamped-contacts-guide","status":"publish","type":"page","link":"https:\/\/metalstampingparts.ltd\/ceb\/tape-and-reel-pocket-orientation-stamped-contacts-guide\/","title":{"rendered":"Tape-and-Reel Pocket Orientation Stamped Contacts Giya"},"content":{"rendered":"

Short answer:<\/strong> Stamped contacts that feed into automated assembly should be quoted with pocket orientation, support points, cover tape, ESD control, reel direction, and shipment evidence. Packaging is part of the process: it must protect kontak force, plating, coplanarity, and pick position while still feeding consistently at the buyer’s line.<\/p>\n

A stamped kontak can be made correctly and still fail the line if it flips in a pocket, rubs a plated surface, sticks to cover tape, or feeds in the wrong orientation. For small contacts, clips, shield fingers, and solderable parts, packaging should be reviewed before production tooling is released.<\/p>\n

Use this page with the reel-to-reel paghulma guide<\/a>, ESD-safe packaging guide<\/a>, thin gauge paghulma guide<\/a>, and packaging and shipping guide<\/a>.<\/p>\n

Tape-and-reel packaging decisions<\/h2>\n\n\n\n\n\n\n\n\n
Decision<\/th>\nWhy it matters<\/th>\nRFQ evidence<\/th>\n<\/tr>\n<\/thead>\n
Pocket orientation<\/td>\nThe assembly machine needs the same part face and rotation every time.<\/td>\nOrientation drawing, datum face, pick point, and reel winding direction.<\/td>\n<\/tr>\n
Pocket support<\/td>\nThin tabs and kontak beams can deform without support.<\/td>\nSupport areas, clearance, pocket depth, and no-touch surfaces.<\/td>\n<\/tr>\n
Cover tape<\/td>\nToo much or too little peel force can stop feeding or shift parts.<\/td>\nCover tape type, peel force target, and clean-removal rule.<\/td>\n<\/tr>\n
Shipment trial<\/td>\nMga Bahin may pass in a sample tray and fail after vibration or stacking.<\/td>\nPacked photos, drop or transport trial, receiving check, and reject criteria.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Start with the machine, not the carton<\/h2>\n

The right package depends on how the buyer loads the part. A pick-and-place process, crimp applicator, bowl feeder, manual assembly bench, and robotic nest all need different orientation evidence. If the buyer says tape-and-reel, the RFQ should still define pocket direction, leader length, trailer length, cover tape, reel diameter, quantity, labels, and ESD need.<\/p>\n

The kontak zone should not rub against a pocket wall or cover tape if surface condition matters. Spring beams should not be compressed during storage unless that condition is designed and tested. For force-sensitive parts, connect the packaging plan to the spring kontak force test guide<\/a> and define whether force is checked after packing.<\/p>\n

Protect geometry and surface condition together<\/h2>\n

Packaging that protects shape can still damage the surface. Hard pocket edges, paper fibers, loose dust, static charge, humidity, and mixed-lot handling can affect plated contacts. The RFQ should identify no-touch surfaces and whether bags, reels, trays, or pocket tape need antistatic material.<\/p>\n

For soldered or press-fit contacts, cleanliness and orientation are tied to assembly yield. Oil, fibers, or rubbed plating may not show in a quick dimensional check. If the kontak is soldered, pair this review with the solderability guide<\/a>. If the kontak is press-fit, pair it with the press-fit force guide<\/a>.<\/p>\n

RFQ details to include<\/h2>\n