{"id":2246,"date":"2026-07-04T04:29:32","date_gmt":"2026-07-03T20:29:32","guid":{"rendered":"https:\/\/metalstampingparts.ltd\/?page_id=2246"},"modified":"2026-07-04T04:29:32","modified_gmt":"2026-07-03T20:29:32","slug":"powder-coated-stamped-parts-masking-rfq-guide","status":"publish","type":"page","link":"https:\/\/metalstampingparts.ltd\/ceb\/powder-coated-stamped-parts-masking-rfq-guide\/","title":{"rendered":"Powder Coated Stamped Mga Bahin Masking RFQ Giya"},"content":{"rendered":"

Short answer:<\/strong> Powder coated giporma nga mga piyesa need masking rules before quoting when holes, threads, grounding pads, weld zones, datums, sliding faces, labels, or cosmetic areas must stay clear. The RFQ should define coating thickness, masked features, acceptable edge buildup, inspection method, packaging, and whether hardware or welding happens before or after coating.<\/p>\n

Powder coating is often added to stamped brackets, covers, panels, and assemblies for corrosion resistance or appearance. Problems start when the drawing only says powder coat black and does not show which features must remain conductive, threaded, weldable, flat, or dimensionally controlled.<\/p>\n

Use this guide with the pre-coated steel paghulma guide<\/a>, process sequence checklist<\/a>, plating and passivation RFQ guide<\/a>, and surface finish inspection guide<\/a>.<\/p>\n

Masking decisions for powder coated stampings<\/h2>\n\n\n\n\n\n\n\n\n
Feature<\/th>\nRisk if not masked<\/th>\nRFQ detail<\/th>\n<\/tr>\n<\/thead>\n
Threads and inserts<\/td>\nCoating buildup can block assembly or change torque.<\/td>\nThread class, plug mask, chase rule, and inspection.<\/td>\n<\/tr>\n
Grounding pads<\/td>\nInsulating coating can break electrical kontak.<\/td>\nBare metal zone, plating option, and continuity check.<\/td>\n<\/tr>\n
Datums and holes<\/td>\nThickness buildup can change fit or fixture location.<\/td>\nFinal-condition tolerance and go\/no-go check.<\/td>\n<\/tr>\n
Weld or adhesive zones<\/td>\nCoating can reduce weld quality or bond strength.<\/td>\nCoat-before or weld-before route and mask boundary.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Show the features that must stay clear<\/h2>\n

The best masking instruction is a marked drawing, not a sentence in an email. Identify threaded holes, PEM hardware, sliding slots, ground kontak pads, weld tabs, bearing surfaces, labels, and cosmetic no-mark areas. If the part is measured after coating, say which dimensions include coating thickness and which must remain metal-to-metal.<\/p>\n

For assemblies, coordinate masking with the hardware insertion guide<\/a>, projection weld nut guide<\/a>, and datum and functional gage guide<\/a>. The sequence can decide whether masking is simple or expensive.<\/p>\n

Control edge buildup and appearance<\/h2>\n

Stamped edges, louvers, corners, and narrow slots can collect coating differently than broad flat surfaces. Burrs, sharp edges, oil residue, and media dust can also affect coverage. Ask whether deburring, cleaning, phosphating, blasting, or pretreatment is included before coating.<\/p>\n

Powder coating may improve corrosion resistance, but it does not remove the need for design review. A tight hole, tab, clip, or hinge area can bind after coating. If corrosion testing is required, connect the request with the salt spray corrosion guide<\/a> and packaging guide<\/a>.<\/p>\n

RFQ details to include<\/h2>\n